Building A Computer From Scratch!

Below are some steps of me buliding a computer

CPU (Central Prossing Unit):
When placing the CPU on the motherboard make sure that the brown leaver is up and on the CUP there will be a pin missing make sure that the missing pin is lined up without a hole on the ZIF (Zero Insertion Force) socket

Hard Drive:
When placing the hard drive into the computer case make sure it is the right way up by making sure that the sockets are at the bottom and there twist the green locks so it will not fall out and the colour may vary in different cases

Inserting ATX Power Cable In To The Motherboard:
When placing the ATX Power cable into the motherboard make sure that you place the cable in the correct slot which is the slot next to the RAM slots which should be white slot

Computer Fully Built:
Once you have placed all of the components and connected all the components together put the side panel back on and then plug all of the cables in the back of the cable and then turn on the PC